E116HX Short End Mills For Lathe
METRIC
ASIA
- End Mills For Lathe- 4 Flutes
- Widely used with driven tool holder in CNC Lathe.
- Perform excellent wear resistance with AlTiN coating.
- The very short tool length is to prevent from interrruption in lathe.
- Increase the commonality by adopting the same small shank diameter.
- Applied in verious steel material up to HRC48.
Steel < 48HRC
P | H | M | K | N | S |
---|---|---|---|---|---|
Work Material
P | H | M | N | ||||
---|---|---|---|---|---|---|---|
GR1 | GR2 | GR3 | GR4 | GR5 | GR8 | GR10 | GR11 |
Carbon Steel | <24HRC Low-alloyed Steel | <30HRC Hi-alloyed Steel | 30~38HRC Hardened Steel | 38~48HRC Hardened Steel | Stainless Steel | Aluminium | Copper |
Product Specification
Dc | Lc | L | d | z |
---|---|---|---|---|
0 -0.02 | mm | mm | h6 | |
3 | 6 | 35 | 4 | 4 |
4 | 6 | 35 | 4 | 4 |
5 | 6 | 35 | 6 | 4 |
6 | 6 | 35 | 6 | 4 |
7 | 6 | 35 | 6 | 4 |
8 | 6 | 35 | 6 | 4 |
9 | 6 | 35 | 6 | 4 |
10 | 6 | 35 | 6 | 4 |
12 | 6 | 35 | 6 | 4 |