• Micro Thread Mills / Oil-Feed Thread Mills
T781HX 7 Leaders

Micro Thread Mills / Oil-Feed Thread Mills

  • ISO Metric Standard Thread
  • Good wear resistance effect with Nano multilayer coating.
  • Suitable for carbon steel, below 48HRC hardened steel, stainless steel, cast iron…etc.


Steel < 48HRC
P H M K N S
VHM
AlTiCrN HX
Flute_3~5Z-R
Relief_N_r 8
Steel<48HRC
Helix_11
Operation Type-2
Work Material
P H M K N S
GR1 GR2 GR3 GR4 GR5 GR6 GR7 GR8 GR9 GR10 GR11 GR12 GR13 GR14 GR15 GR16 GR17
Carbon Steel <24HRC
Low-alloyed Steel
<30HRC
Hi-Alloyed Steel
30~38HRC
Hardened Steel
38~48HRC
Hardened Steel
48~56HRC
Hardened Steel
56~68HRC
Hardened Steel
Stainless Steel Cast Iron Aluminium Copper Plastics FRP CFRP Composite Material Graphite Titanium Nickel High Temp Alloys
Product Specification
  • M1x0.25 ~ M20x2.5
Thread Pitch Dc Lc L1 L d t Zt
Thread Fine mm mm mm mm mm h6 mm
M1x0.25 0.25 0.72 0.25 2.8 50 4 3 1
M1.2x0.25 0.25 0.91 0.25 3.3 50 4 3 1
M1.4x0.3 0.3 1.05 0.3 3.8 50 4 3 1
M1.6x0.35 0.35 1.2 0.35 4.3 50 4 3 1
M1.8x0.35 0.35 1.3 0.35 4.8 50 4 3 1
M2x0.4 0.4 1.5 1.2 4.5 50 4 3 3
M2.5x0.45 0.45 1.9 1.4 5.6 50 4 3 3
M3x0.5 M3.5~M16x0.5 0.5 2.4 1.5 6.5 50 4 3 3
M4×0.7 0.7 3.1 2.1 8.7 50 6 3 3
M5×0.8 0.8 4 2.4 10.8 50 6 3 3
M6x1 1 4.5 13 15 60 6 4
M8x1.25 1.25 6 17.8 65 6 4
M10x1.5 1.5 7.5 22.5 25 70 8 4
M12×1.75 1.75 9.5 26.3 27 80 10 5
M14x2 2 10 30 90 10 5
M16×2 2 12 34 100 12 5
M20x2.5 2.5 16 42.5 110 16 5