F513SX Multipurpose End Mills
METRIC
DIN
- Designed with two variable helix geometry, three unequal flutes, sharp cutting edge, and high removal cutting geometry.
- Good wear resistance and lubricating effect with Nano multilayer coating.
- Sharp cutting edge recommended for stainless steel, as well for cutting different steels below 48HRC, such as cast iron.
- Application for roughing and finishing cutting, drilling, and ramping.
- Work on any cutting direction with high speed condition.
- ※Tool with side lock is available.
Steel < 48HRC
| P | H | M | K | N | S |
|---|---|---|---|---|---|
Work Material
| P | H | M | K | N | S | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| GR1 | GR2 | GR3 | GR4 | GR5 | GR8 | GR9 | GR10 | GR11 | GR15 | GR16 | GR17 |
| Carbon Steel | <24HRC Low-alloyed Steel | <30HRC Hi-alloyed Steel | 30~38HRC Hardened Steel | 38~48HRC Hardened Steel | Stainless Steel | Cast Iron | Aluminium | Copper | Titanium | Nickel | High Temp Alloys |
Product Specification
| Dc | Lc | L | d | L1 | D1 | z |
|---|---|---|---|---|---|---|
| 0-0.02 | mm | mm | mm | mm | mm | |
| 3 | 8 | 57 | 6 | 14 | 2.8 | 3 |
| 4 | 11 | 57 | 6 | 16 | 3.8 | 3 |
| 5 | 13 | 57 | 6 | 18 | 4.8 | 3 |
| 6 | 13 | 57 | 6 | 20 | 5.8 | 3 |
| 8 | 19 | 63 | 8 | 26 | 7.7 | 3 |
| 10 | 22 | 72 | 10 | 31 | 9.7 | 3 |
| 12 | 26 | 83 | 12 | 37 | 11.6 | 3 |
| 14 | 26 | 83 | 14 | 37 | 13.5 | 3 |
| 16 | 32 | 92 | 16 | 43 | 15.5 | 3 |
| 18 | 32 | 92 | 18 | 43 | 17.5 | 3 |
| 20 | 38 | 104 | 20 | 53 | 19.5 | 3 |