F524SX Premium Cut End Mills
METRIC
DIN
- Two unequal flutes, and small edge cutting land with the relief angle, with better impact resistance.
- Designed with high removal cutting geometry.
- The use of Si-silicon AlTiSiN coating has excellent wear resistance.
- Improved cutting edge strength for cutting different materials below 48HRC, stainless steel, cast iron as well as aluminium.
- Application from roughing to finishing cutting, drilling, ramping… in different materials.
- ※Tool with side lock is availabl
Steel < 48HRC
| P | H | M | K | N | S |
|---|---|---|---|---|---|
Work Material
| P | H | M | K | |||
|---|---|---|---|---|---|---|
| GR1 | GR2 | GR3 | GR4 | GR5 | GR8 | GR9 |
| Carbon Steel | <24HRC Low-alloyed Steel | <30HRC Hi-alloyed Steel | 30~38HRC Hardened Steel | 38~48HRC Hardened Steel | Stainless Steel | Cast Iron |
Product Specification
| Dc | Lc | L | d | L1 | D1 | 45゜ | z |
|---|---|---|---|---|---|---|---|
| 0 -0.02 | mm | mm | h5 | mm | mm | mm | |
| 3 | 8 | 57 | 6 | 14 | 2.8 | 0.1 | 4 |
| 4 | 11 | 57 | 6 | 16 | 3.8 | 0.1 | 4 |
| 5 | 13 | 57 | 6 | 18 | 4.8 | 0.15 | 4 |
| 6 | 13 | 57 | 6 | 20 | 5.8 | 0.15 | 4 |
| 8 | 19 | 63 | 8 | 26 | 7.7 | 0.15 | 4 |
| 10 | 22 | 72 | 10 | 31 | 9.7 | 0.2 | 4 |
| 12 | 26 | 83 | 12 | 37 | 11.6 | 0.2 | 4 |
| 14 | 26 | 83 | 14 | 37 | 13.5 | 0.2 | 4 |
| 16 | 32 | 92 | 16 | 43 | 15.5 | 0.2 | 4 |
| 18 | 32 | 92 | 18 | 43 | 17.5 | 0.2 | 4 |
| 20 | 38 | 104 | 20 | 53 | 19.5 | 0.2 | 4 |