F515SX Multipurpose End Mills
METRIC
DIN
- Designed with variable helix geometry, unequal flutes.
- Have good wear resistance and impact resistance.
- Good wear resistance and lubricating effect with Nano ZrN multilayer coating.
- With Y-shape special oil-feed design can make cutting fluid act more directly on cutting point to enhance chip removal rate.
- Suitable for cutting different steel below 48HRC as well as stainless steel and aluminium.
- Application from roughing to finishing cutting, drilling, ramping… in different materials.
- ※Tool with side lock is available.
Steel < 48HRC
| P | H | M | K | N | S |
|---|---|---|---|---|---|
Work Material
| P | H | M | K | N | S | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| GR1 | GR2 | GR3 | GR4 | GR5 | GR8 | GR9 | GR10 | GR11 | GR15 | GR16 | GR17 |
| Carbon Steel | <24HRC Low-alloyed Steel | <30HRC Hi-alloyed Steel | 30~38HRC Hardened Steel | 38~48HRC Hardened Steel | Stainless Steel | Cast Iron | Aluminium | Copper | Titanium | Nickel | High Temp Alloys |
Product Specification
| Dc | Lc | L | d | L1 | D1 | 45゜ | z |
|---|---|---|---|---|---|---|---|
| 0 -0.02 | mm | mm | h5 | mm | mm | mm | |
| 6 | 19 | 63 | 6 | 26 | 5.8 | 0.15 | 4 |
| 8 | 28 | 72 | 8 | 35 | 7.7 | 0.15 | 4 |
| 10 | 34 | 84 | 10 | 43 | 9.7 | 0.2 | 4 |
| 12 | 40 | 97 | 12 | 51 | 11.6 | 0.2 | 4 |
| 16 | 48 | 108 | 16 | 59 | 15.5 | 0.2 | 4 |
| 20 | 56 | 122 | 20 | 71 | 19.5 | 0.2 | 4 |